User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            HP 54200A:Digitizing Oscilloscope
DATE:                  12-Dec-97
AUTHOR:                User Contributed
REVISION:              0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       5
NUMBER OF LINES:       47
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  HEAD         INITIAL CONDITIONS
  1.002  DISP         The following Standard test equipment is needed:
  1.002  DISP         Tektronix SG 503 Leveled Sine Wave Generator
  1.002  DISP         Tektronix PG 506 Calibration Generator
  1.002  DISP         Tektronix TG 501 Time Mark Generator
  1.003  DISP         Allow instrument to warm-up for at least 30 minutes
  1.003  DISP         prior to beginning performance test.
  1.004  DISP         Perform a key-down power-up reset. This will preset the
  1.004  DISP         HP 54200A to a predetermined condition and clear the
  1.004  DISP         display memory. Hold any front key down while applying
  1.004  DISP         power to the instrument. Hold the key down long enough
  1.004  DISP         for the power-up tune to be completed.
  1.005  DISP         Press the SYSTEM key, then press the
  1.005  DISP         down arrow key to tab the cursor to....
  1.005  DISP
  1.005  DISP         [27][91]1mHP-IB Address Mode:
  1.006  DISP         Press the NEXT key to scroll to....
  1.006  DISP
  1.006  DISP         [27][91]7m[91]Addressable[93][27][91]0m [27][91]7m XX
  1.006  DISP
  1.006  DISP         NOTE - XX leave the address number as found.
  1.007  DISP         Connect an IEEE cable from Port 1 to UUT.
  1.008  JMP          2.001
  1.009  EVAL   dummy
  2.001  CALL         HP 54200A Sub1
  2.002  JMP          3.001
  2.003  EVAL   dummy
  3.001  CALL         HP 54200A Sub2
  3.002  JMP          4.001
  3.003  EVAL   dummy
  4.001  CALL         HP 54200A Sub3
  4.002  JMP          5.001
  4.003  EVAL   dummy
  5.001  CALL         HP 54200A Sub4
  5.002  HEAD
  5.003  END